FAQ - Frequently asked questions

What are the key advantages of the SAQUICK TITAN 2400 in flood protection?

The SAQUICK TITAN 2400 is a sandbag filling machine specifically designed for flood protection, enabling the efficient filling of sandbags with wet or moist sand. It is optimized for high output, rapid deployment, safe operation and minimal maintenance.

• Up to 2,600 sandbags per hour
• Ready for operation in approx. 10 minutes
• Suitable for wet and moist sand
• Continuous loading from the rear using a wheel loader or excavator
• Clear separation between loading and filling zones
• Low maintenance requirements
• Hot-dip galvanized construction for maximum corrosion protection

Learn more about the SAQUICK TITAN 2400

How many sandbags per hour can the SAQUICK TITAN 2400 fill?

With continuous loading, the SAQUICK TITAN 2400 can achieve a capacity of up to 2,600 sandbags per hour. Each filling outlet produces approximately 650 sandbags per hour.

This corresponds to a throughput of approximately 39 tons of sand per hour. This makes the system particularly suitable for emergency situations where large quantities are required within a short time.

View technical data and datasheet

Why is the SAQUICK TITAN 2400 particularly suitable for flood protection?

Flood response operations require speed, safety and reliability. The SAQUICK TITAN 2400 has been developed specifically for these requirements.

• Continuous loading from the rear using wheel loader or excavator
• Sandbag filling on the front side
• No need for operators to leave their working position during operation
• High operational reliability under demanding conditions

The separation of mechanical loading and manual filling increases safety and ensures uninterrupted operation.

Can the SAQUICK TITAN 2400 process wet or difficult material?

Yes. The system is designed to handle wet and moist sand without issues. Material containing small stones can also be processed.

An optional vibration motor with interval control supports material flow and prevents compaction and bridging.

What sand specifications are required for optimal machine performance?

The grain size and classification of the sand have a direct impact on both the efficiency and the durability of the system. In technical terms, sand is defined as a material between silt (< 0.063 mm) and gravel (> 2 mm).

The particle size fractions can be categorized as follows:

• Fine sand: 0.063 – 0.2 mm
• Medium sand: 0.2 – 0.63 mm
• Coarse sand: 0.63 – 2 mm

Optimal working range:
For best performance, sand with a grain size of 0.1 mm and above is considered ideal.

Service support for operational reliability

To minimize downtime and reduce wear, SAQUICK provides additional support based on practical field experience:

• Regional material analysis: Evaluation of geological sand characteristics specific to your deployment area
• Machine reference database: Matching your requirements with proven configurations from existing deployments

How quickly can the SAQUICK TITAN 2400 be deployed?

The machine is operational in approximately 10 minutes and does not require complex setup or additional infrastructure.

Its robust and simple design enables fast deployment in time-critical situations.

What sandbag sizes can be filled?

Standard sandbags from 30 x 60 cm and larger can be filled. For smaller openings, such as silo bags, suitable filling nozzles are available.

The filling volume can be manually adjusted to accommodate different bag sizes.

How does the filling process work during operation?

The machine is continuously loaded from the rear using a wheel loader, excavator or conveyor. Filling is carried out at the front via four filling outlets.

• 4 filling outlets with quick opening and closing system
• Fast filling in approx. 1–2 seconds per sandbag
• Continuous material flow during operation

This setup enables high throughput while maintaining a safe workflow.

How is operator safety ensured?

The machine clearly separates the mechanical loading area from the manual filling area. Operators remain in a protected working zone.

• Rear loading
• Front-side filling
• Safety grid protection
• Emergency stop button

This separation is a key advantage in emergency deployment scenarios.

What are the technical advantages compared to more complex systems?

The SAQUICK TITAN 2400 uses a simple, robust and low-maintenance design. This reduces failure risk and ensures reliable operation.

• Easy operation
• Durable construction
• High material thickness
• Low susceptibility to failure
• 3-year warranty
• CE conformity

What are the key technical specifications?

• 5.5 kW electric motor with helical bevel gearbox
• 1,700 Nm torque
• 1,000 liter usable material capacity
• Generator operation possible (13 kVA)
• Direction switch for conveyor screw
• 230V socket for external devices
• Adjustable support legs for ergonomic working height
• Forklift pockets, lifting eyes and wheels for transport

Open product page and datasheet